Haɗaɗɗen ma'aunin gano iskar gas mai ɗaukuwa
Tsarin tsari
1. Tebura1 Jerin Abubuwan Abubuwan Haɗaɗɗen Gas ɗin Gas mai ɗaukar nauyi
 |  |
| Haɗaɗɗen Gas Gas mai ɗaukuwa | Caja na USB |
 |  |
| Takaddun shaida | Umarni |
Da fatan za a duba kayan nan da nan bayan an kwashe kaya.Daidaitaccen kayan haɗi dole ne.Zaɓin shine za'a iya zaɓa bisa ga bukatun ku.Idan ba ku da buƙatar daidaitawa, saita sigogin ƙararrawa, ko karanta rikodin ƙararrawa, kar ku sayi na'urorin haɗi na zaɓi.
Sigar tsarin
Lokacin Caji: kimanin awa 3 ~ 6 hours
Yin cajin wutar lantarki: DC5V
Lokacin Sabis: kamar awanni 12 (sai lokacin ƙararrawa)
Gas: iskar oxygen, iskar gas mai ƙonewa, carbon monoxide, hydrogen sulfide.Wasu nau'ikan ana iya sanye su ta hanyar buƙata
Yanayin Aiki: Zazzabi 0 ~ 50 ℃;yanayin zafi <90%
Lokacin Amsa: Oxygen <30S;carbon monoxide <40s;iskar gas mai ƙonewa <20S;hydrogen sulfide <40S (wasu an cire su)
Girman Kayan aiki: L * W * D;120 * 66 * 30
Ma'aunin Ma'auni sune: a cikin tebur mai zuwa.
Tebur 2 Ma'aunin Ma'auni
| Gas | Sunan gas | Fihirisar fasaha | ||
| Kewayon aunawa | Ƙaddamarwa | Alamar ƙararrawa | ||
| CO | Carbon monoxide | 0-1000pm | 1ppm ku | 50ppm ku |
| H2S | Hydrogen sulfide | 0-200pm | 1ppm ku | 10ppm ku |
| EX | Gas mai ƙonewa | 0-100% LEL | 1% LEL | 25% LEL |
| O2 | Oxygen | 0-30% vol | 0.1% vol | Ƙananan 18% vol Babban 23% vol |
| H2 | Hydrogen | 0-1000pm | 1ppm ku | 35ppm ku |
| CL2 | Chlorine | 0-20pm | 1ppm ku | 2ppm ku |
| NO | Nitric oxide | 0-250pm | 1ppm ku | 35ppm ku |
| SO2 | Sulfur dioxide | 0-20pm | 1ppm ku | 10ppm ku |
| O3 | Ozone | 0-50pm | 1ppm ku | 2ppm ku |
| NO2 | Nitrogen dioxide | 0-20pm | 1ppm ku | 5ppm ku |
| NH3 | Ammonia | 0-200pm | 1ppm ku | 35ppm ku |
Siffofin samfur
● Ma'anar nunin Sinanci
Gano nau'ikan iskar gas guda huɗu a lokaci guda, ana iya saita nau'in iskar gas gwargwadon buƙatun mai amfani
● Ƙarami da sauƙin ɗauka
● Maɓallai biyu, aiki mai sauƙi
● Tare da ainihin agogo za a iya saita kamar yadda ake buƙata
● LCD na ainihi nuni na iskar gas da matsayi na ƙararrawa
● Daidaitaccen baturin lithium mai caji
● Tare da rawar jiki, fitilu masu walƙiya da sautuna iri uku na yanayin ƙararrawa, ƙararrawar na iya yin shiru da hannu.
● Sauƙaƙe gyarawa ta atomatik (idan babu muhallin iskar gas mai guba zai iya taya)
● Hanyoyin saka idanu na gas guda biyu, dacewa don amfani
● Ajiye fiye da rikodin ƙararrawa 3,000, ana iya buƙata don duba shi
Mai gano iskar gas na iya nuna nau'ikan iskar gas guda huɗu a lokaci guda ko nau'in alamomin lambobi ɗaya na iskar.Fihirisar iskar gas da za a gano ta wuce ko faɗuwa ƙasa da ƙa'idar da aka saita, kayan aikin za su gudanar da jerin ayyukan ƙararrawa ta atomatik, fitillu masu walƙiya, girgiza da sauti.
Mai ganowa yana da maɓalli guda biyu, nuni na LCD da ke hade da na'urorin ƙararrawa (hasken ƙararrawa, buzzer da vibration), kuma za a iya cajin micro USB interface ta micro USB;Bugu da ƙari, za ka iya haɗa kebul na tsawo na serial ta hanyar filogi na adafta (TTL zuwa USB) don sadarwa tare da kwamfuta, daidaitawa, saita sigogin ƙararrawa da karanta tarihin ƙararrawa.Mai ganowa yana da ma'ajin lokaci na gaske don yin rikodin matsayin ƙararrawa na ainihi da lokaci.Takamaiman umarni don Allah koma zuwa bayanin da ke gaba.
2.1 Button aiki
Kayan aiki yana da maɓalli guda biyu, aiki kamar yadda aka nuna a tebur 3:
Table 3 aiki
| Maɓalli | Aiki |
|
| Boot, kashewa, da fatan za a danna maɓallin sama 3S Duba sigogi, da fatan za a danna  Shigar da aikin da aka zaɓa |
 | Shiru Shigar da menu kuma tabbatar da ƙimar saita, a lokaci guda, da fatan za a danna maɓallin button kumamaballin.Zaɓin menu button, dannamaballin don shigar da aikin |
Lura: wasu Ayyuka a kasan allon azaman kayan nuni.
Nunawa
Zai je nunin taya ta dogon danna maɓallin dama a cikin yanayin alamun gas na yau da kullun, wanda aka nuna a FIG.1:
Hoto 1 Nunin taya
Wannan keɓancewa shine jira don daidaita sigogin kayan aiki.Wurin gungurawa yana nuna lokacin jira, kusan 50s.X% shine jadawali na yanzu.Kusurwar ƙasan hagu shine lokacin na'urar na yanzu wanda za'a iya saita shi a menu.Ikon
yana nuna matsayin ƙararrawa (yana juya zuwa lokacin ƙararrawa).Ikon
a dama yana nuna cajin baturi na yanzu.
A ƙasan nunin akwai maɓallai biyu, zaku iya buɗe / rufe mai ganowa, sannan shigar da menu don canza lokacin tsarin.Ayyuka na musamman na iya nufin saitunan menu masu zuwa.
Lokacin da kashi ya juya zuwa 100%, kayan aikin yana shiga cikin nunin gas na 4 mai saka idanu.Hoto na 2:
FIG.2 yana lura da nunin gas 4
Nuna: nau'in gas, maida hankali gas, naúrar, matsayi.Nuna a cikin FIG.2.
Lokacin da iskar gas ya wuce manufa, nau'in ƙararrawa (carbon monoxide, hydrogen sulfide, nau'in ƙararrawar iskar gas mai ƙonewa shine ɗaya ko biyu, yayin da nau'in ƙararrawa na iskar oxygen don babba ko ƙananan iyaka) zai nuna a gaban naúrar, hasken baya, LED. walƙiya kuma tare da rawar jiki, gunkin lasifikar ya ɓace slash, wanda aka nuna a FIG.3.
Fig.3 Alamar Interface
1. Nau'in nunin iskar gas guda ɗaya:
Nuna: nau'in gas, matsayi na ƙararrawa, lokaci, ƙimar ƙararrawar liba ta farko (ƙararrawa mafi girma), ƙimar ƙararrawa matakin na biyu (ƙananan ƙararrawa), kewayo, ƙimar maida iskar gas na yanzu, naúrar.
Ƙarƙashin ƙimar maida hankali na yanzu akwai halayen "dawowa" na gaba "na gaba", wanda ke wakiltar maɓallan ayyuka masu dacewa a ƙasa.Danna maɓallin "na gaba" da ke ƙasa (wato hagu), allon nuni yana nuna wani alamar iskar gas, kuma latsa hagu na haɗin gas hudu zai nuna sake zagayowar.
Fig.4 Carbon monoxide
FIG.5 Hydrogen sulfide
FIG.6 Gas mai ƙonewa
FIG.7 Oxygen
Panel nunin ƙararrawa ɗaya wanda aka nuna a hoto 8, 9:
Lokacin da ɗaya daga cikin ƙararrawar iskar gas, "na gaba" ya zama "mai shiru", danna maɓallin bugun murya don zama bebe, musanya na'urar zuwa ainihin font bayan "na gaba."
FIG.8 Matsayin ƙararrawar oxygen
FIG.9 Halin ƙararrawar hydrogen sulfide
2.3 Bayanin Menu
Don shigar da menu, dole ne ka riƙe hagu da farko sannan ka danna dama, saki maɓallin hagu, duk abin da ke dubawa.
Menu yana nunawa a FIG.10:
FIG.10 babban menu
Alamar tana nufin aikin da aka zaɓa na yanzu, danna hagu zaɓi wasu ayyuka, sannan danna maɓallin dama don shigar da aikin.
Bayanin aiki:
● Saita lokaci: saita lokaci.
● Rufe: rufe kayan aiki
● Shagon ƙararrawa: Duba rikodin ƙararrawa
● Saita bayanan ƙararrawa: Saita ƙimar ƙararrawa, ƙarancin ƙararrawa da ƙimar ƙararrawa mai girma
● Kayan aiki cal: gyare-gyaren sifili da kayan daidaitawa
Baya: baya don gano nau'ikan iskar gas iri huɗu.
2.3.1 Saita lokaci
A cikin FIG.10, danna dama kuma shigar da menu na saitin, wanda aka nuna a FIG.11:
FIG.11 menu na saitin lokaci
Alamar tana nufin lokacin daidaitawa, danna maɓallin dama don zaɓar aikin, wanda aka nuna a FIG.12, sannan danna maɓallin hagu don canza bayanan.Danna maɓallin Hagu don zaɓar wani aikin daidaitawa lokaci.
FIG.12Ka'ida lokaci
Bayanin Aiki:
● Shekara: saitin iyaka 19 zuwa 29.
● Watan: kewayon saiti 01 zuwa 12.
● Rana: kewayon saitin yana daga 01 zuwa 31.
● Sa'a: kewayon saiti 00 zuwa 23.
● Minti: kewayon saiti 00 zuwa 59.
Komawa zuwa babban menu.
2.3.2 Rufewa
A cikin babban menu, danna maɓallin hagu don zaɓar aikin 'kashe', sannan danna maɓallin dama don rufewa.
Zai iya dogon danna maɓallin dama na daƙiƙa 3 ko fiye a kashe.
2.3.3 kantin ƙararrawa
A cikin babban menu, zaɓi aikin 'record' a hagu, sannan danna dama don shigar da menu na rikodin, kamar yadda aka nuna a adadi 14.
● Ajiye lamba: jimlar adadin rikodin ƙararrawa na ajiyar kayan ajiya.
● Lambobin Lambobi: adadin kayan aikin ajiyar bayanai idan ya fi girma fiye da jimlar ƙwaƙwalwar ajiya zai fara dawowa daga ɗaukar bayanai na farko, in ji ɗaukar hoto na lokutan.
Yanzu Lamba: lambar ma'auni na yanzu, wanda aka nuna an ajiye shi zuwa Lamba 326.
Hoto 14 Rubutun ƙararrawa duba Hoto 15 takamaiman ƙa'idar neman rikodin rikodi
Don nuna sabon rikodin, duba rikodin a hagu, danna maɓallin dama don komawa zuwa babban menu, kamar yadda aka nuna a adadi 14.
2.3.4 Saita bayanan ƙararrawa
A cikin babban menu, danna maɓallin hagu don zaɓar aikin 'Set alarmdata', sannan danna maɓallin dama don shigar da ƙararrakin zaɓin zaɓin iskar gas, kamar yadda aka nuna a adadi 17. Danna maɓallin hagu don zaɓar nau'in iskar gas don saitawa. Ƙimar ƙararrawa, danna dama don shiga cikin zaɓin ƙirar ƙimar ƙararrawar gas.Anan a cikin yanayin carbon monoxide.
FIG.16 Zabi gas
FIG.17 Saitin bayanan ƙararrawa
A cikin hoto na 17, danna maballin hagu don zaɓar saitin ƙimar ƙimar ƙararrawar carbon monoxide, sannan danna maɓallin dama don shigar da menu na saitunan, kamar yadda aka nuna a hoto na 18, sannan danna maɓallin hagu don canza bayanan. danna maballin dama yana walƙiya ta ƙimar lambobi da ɗaya, game da saitunan maɓalli da ake buƙata, bayan saita latsa kuma ka riƙe maɓallin danna dama na hagu, shigar da ƙimar ƙararrawa don tabbatar da ƙirar lamba, sannan danna maɓallin hagu, saita bayan kunnawa. nasarar tsakiyar matsayi na kasan nunin allo, da 'nasara' nasihun' sun kasa', kamar yadda aka nuna a adadi 19.
Lura: saita ƙimar ƙararrawa dole ne ya zama ƙasa da ƙimar tsoho (ƙananan iyakar oxygen dole ne ya fi ƙimar tsoho), in ba haka ba zai gaza.
FIG.18 tabbatar da ƙimar ƙararrawa
Fig.19An saita cikin nasara
2.3.5 Daidaita Kayan aiki
Lura: Ana kunna na'urar ne kawai bayan farawa na sifili calibration da calibration na gas, lokacin da na'urar ke gyarawa, dole ne gyara ya zama sifili, sannan daidaitawar iska.
Kamar yadda aka saita lokaci guda, fara kawo babban menu, sannan danna dama a cikin menu na "System Settings".
Sifili calibration
Mataki 1: Matsayin menu na 'System Settings' wanda maɓallin kibiya ya nuna shine don zaɓar aikin.Danna maɓallin hagu don zaɓar 'daidaita kayan aiki' abubuwan fasalin.Sannan maɓallin dama don shigar da kalmar shigar da kalmar wucewa menu na calibration, wanda aka nuna a hoto na 18. Bisa ga jere na ƙarshe na gumaka suna nuna mahaɗin, maɓallin hagu don canza raƙuman bayanai, maɓallin dama zuwa da lambobi masu walƙiya a halin yanzu.Shigar da kalmar wucewa 111111 ta hanyar haɗin maɓallan biyu.Sannan riže maɓallin hagu, maɓallin dama, na'ura mai ba da hanya tsakanin hanyoyin sadarwa tana jujjuya zuwa wurin zaɓin daidaitawa, kamar yadda aka nuna a hoto na 19.
FIG.20 Kalmar wucewa Shiga
FIG.21 Zaɓin daidaitawa
Mataki 2: Danna maballin hagu don zaɓar abubuwan fasalin 'zero cal', sannan danna menu na dama don shigar da sifilin calibration, zaɓi iskar gas da aka nuna a hoto na 21, bayan ka tantance gas ɗin yanzu shine 0ppm, danna maɓallin hagu don tabbatarwa, bayan haka. calibration na ya yi nasara, layin ƙasa a tsakiya zai nuna 'calibration of nasara' akasin haka wanda aka nuna kamar yadda aka nuna a 'calibration of Failed', wanda aka nuna a hoto na 22.
FIG.21 Zabi gas
FIG.22 Zaɓin daidaitawa
Mataki 3: Bayan sifili calibration ya cika, danna dama don komawa zuwa calibration na allon zaɓi, a wannan lokacin za ku iya zaɓar calibration na gas, danna menu na gano matakin gano matakin matakin ɗaya, akwai kuma a cikin allon ƙirgawa, kar a danna. kowane maɓalli idan aka rage lokacin zuwa 0 fita ta atomatik daga menu, Komawa wurin gano iskar gas.
Gas calibration
Mataki 1: Bayan iskar gas ɗin ya zama tsayayye darajar nuni, shigar da babban menu, kira sama da zaɓi na Calibration.
Mataki na 2: Zaɓi abubuwan fasalin 'gas calibration', danna maɓallin dama don shigar da ƙimar ƙimar Calibration, sannan saita ƙimar daidaitaccen iskar gas ta maɓallin hagu da dama, ɗauka yanzu cewa Calibration iskar gas ce ta carbon monoxide, maida hankali na iskar gas ɗin Calibration. shine 500ppm, a wannan lokacin saita zuwa '0500' na iya zama.Kamar yadda aka nuna a hoto na 23.
Hoto23 Saita yawan adadin iskar gas
Mataki 3: Bayan saita calibration, riƙe ƙasa da maɓallin hagu da maɓallin dama, canza mu'amala zuwa madaidaicin iskar gas, kamar yadda aka nuna a hoto na 24, wannan ƙirar tana da ƙimar da aka gano ta yanzu.
Hoto 24 Matsalolin Daidaitawa
Lokacin da kirgawa ya tafi 10, zaku iya danna maballin hagu don daidaitawa ta hannu, bayan 10S, gas ɗin yana daidaita atomatik, bayan Calibration ya yi nasara, ƙirar tana nuna nasarar Calibration!'Sai akasin Nuna' Calibration ya kasa!Tsarin nuni da aka nuna a hoto na 25.
Hoto 25 Sakamakon daidaitawa
Mataki na 4: Bayan Calibration ya yi nasara, ƙimar gas ɗin idan nunin bai tsaya ba, Kuna iya zaɓar 'rescaled', idan daidaitawar ta gaza, duba ƙididdigar iskar gas da saitunan daidaitawa iri ɗaya ne ko a'a.Bayan an gama daidaita iskar gas, danna dama don komawa wurin gano iskar gas.
2.4 Cajin Baturi da Kulawa
Matsayin baturi na ainihi yana nuni akan nunin, kamar yadda aka nuna a hoton da ke ƙasa.
Na al'ada
Na al'ada
Ƙananan baturi
Idan baturin da aka sa ya yi ƙasa, da fatan za a yi caji.
Hanyar yin caji shine kamar haka:
Yin amfani da cajar da aka keɓe, sanya ƙarshen kebul ɗin zuwa tashar caji, sannan caja zuwa tashar 220V.Lokacin caji yana kusan awa 3 zuwa 6.
2.5 Matsalolin gama gari da Magani
Table 4 matsaloli da mafita
| Al'amarin gazawa | Dalilin rashin aiki | Magani |
| Ba za a iya yin booting ba | Ƙananan baturi | Da fatan za a yi caji |
| karo | Da fatan za a tuntuɓi dilan ku ko masana'anta don gyarawa | |
| Laifin zagaye | Da fatan za a tuntuɓi dilan ku ko masana'anta don gyarawa | |
| Babu amsa akan gano gas | Laifin zagaye | Da fatan za a tuntuɓi dilan ku ko masana'anta don gyarawa |
| Nuni ba daidai ba ne | Sensors sun ƙare | Da fatan za a tuntuɓi dilan ku ko masana'anta don maye gurbin firikwensin |
| Dogon lokaci ba calibrated | Don Allah Calibration | |
| Kuskuren nuni lokaci | Baturin ya ƙare gaba ɗaya | Cajin kan lokaci kuma sake saita lokacin |
| Tsangwama mai ƙarfi na lantarki | Sake saita lokaci | |
| Babu fasalin daidaita sifili | Wuce kitse na firikwensin | Daidaita lokaci ko maye gurbin na'urori masu auna firikwensin |
1) Tabbatar da guje wa caji na dogon lokaci.Lokacin caji na iya tsawaita, kuma firikwensin kayan aikin na iya shafar bambance-bambance a cikin caja (ko cajin bambance-bambancen muhalli) lokacin da kayan aikin ke buɗe.A mafi yawan lokuta masu tsanani, yana iya ma bayyana kuskuren kayan aiki ko yanayin ƙararrawa.
2) Lokacin caji na yau da kullun na sa'o'i 3 zuwa 6 ko makamancin haka, gwada kada ku yi cajin kayan aikin cikin sa'o'i shida ko fiye don kare ingantaccen rayuwar baturi.
3) Na'urar na iya yin aiki na tsawon sa'o'i 12 ko makamancin haka bayan cikar caji (sai dai yanayin ƙararrawa, saboda walƙiya lokacin ƙararrawa, girgiza, sautin yana buƙatar ƙarin ƙarfi. Lokacin aiki ya ragu zuwa 1/2 zuwa 1/3 lokacin kiyaye ƙararrawa. hali).
4) Tabbatar da guje wa amfani da kayan aiki a cikin yanayi mai lalacewa
5) Tabbatar da guje wa hulɗa da kayan aikin ruwa.
6) Ya kamata a cire haɗin kebul ɗin wutar lantarki, kuma a caji shi kowane watanni 2-3, don kare rayuwar baturi na yau da kullun lokacin da ba a amfani da shi na dogon lokaci.
7) Idan na'urar ta yi karo ko ba za a iya buɗe ta ba, za ka iya cire igiyar wutar lantarki, sannan ka toshe igiyar wutar lantarki don sauƙaƙa yanayin haɗari.
8) Tabbatar cewa alamun gas sun kasance al'ada lokacin bude kayan aiki.
9) Idan kuna buƙatar karanta rikodin ƙararrawa, mafi kyawun shigar da menu zuwa daidaitaccen lokaci kafin farawa bai kammala ba don hana rikicewa lokacin karanta bayanan.
10) Da fatan za a yi amfani da software na daidaitawa idan an buƙata, saboda kayan aikin kaɗai ba za a iya daidaita shi ba.
Lura: Duk abubuwan da aka makala zaɓi ne, wanda ya dogara da buƙatun abokin ciniki.Waɗannan zaɓin suna buƙatar ƙarin caji.
| Zabin | |
 |  |
| Kebul zuwa serial USB (TTL) | Kunshin shigar software mai ɗaukuwa |
4.1 Serial sadarwa igiyoyi
Haɗin yana kamar haka.The gas Detector+ tsawo na USB + kwamfuta
Connection: dayan ƙarshen serial tsawo na USB yana haɗa kwamfutar, mini USB ya haɗa kayan aiki.
Connection: kebul na USB yana haɗe da kwamfuta, micro USB yana haɗi da Detector.
Da fatan za a yi aiki ta hanyar haɗa tare da umarni a CD.
4.2 Saita Sigar
Don saita sigogi, da fatan za a yi amfani da daidaitaccen software mai gano iskar gas ɗin da ya dace.
Lokacin saita sigogi, gunkin USB zai bayyana a nunin.Wurin gunkin USB yana bayyana bisa ga nunin.FIG.26 shine ɗayan toshe kebul na kebul lokacin saita sigogi:
Fig.26 Interface na Saita Sigogi
Alamar USB tana walƙiya lokacin da muka saita software a cikin "ainihin nuni" da "gas calibration" allon;a cikin "Parameter Settings", kawai danna maɓallin "karanta sigogi" da "saitin sigogi", kayan aikin na iya bayyana alamar USB.
4.3 Duba rikodin ƙararrawa
Ana nuna dubawa a ƙasa.
Bayan karanta sakamakon, nunin yana komawa zuwa nau'ikan iskar gas iri huɗu, idan kuna buƙatar dakatar da karanta ƙimar rikodin ƙararrawar, danna maɓallin "baya" a ƙasa.
FIG.27 Karatun rikodin dubawa
Samfura masu alaƙa
-
Umarnin ƙararrawar iskar gas mai ɗaure bango ɗaya-daya...
Ma'auni na fasaha ● Sensor: firikwensin infrared ● Lokacin amsawa: ≤40s (nau'in al'ada) ● Tsarin aiki: ci gaba da aiki, babba da ƙananan ƙararrawa (ana iya saita) ● Analog dubawa: 4-20mA fitarwa na sigina [zaɓi] ● Digital interface: RS485-bas dubawa [zaɓi] ● Yanayin nuni: Zane-zane LCD ● Yanayin ƙararrawa: Ƙararrawa mai sauti - sama da 90dB;Ƙararrawa mai haske -- Babban tashin hankali ● Sarrafa fitarwa: relay o...
-
šaukuwa famfo tsotsa man gas guda ɗaya Mai amfani&...
Tsarin Siffar Tsarin Tsari 1. Tebura1 Abubuwan Abu na Maɗaukakin famfo tsotsa mai gano gas guda ɗaya Gas Gas Cajin USB Da fatan za a duba kayan nan da nan bayan an kwashe kaya.Daidaitaccen kayan haɗi dole ne.Za a iya zaɓar zaɓi bisa ga bukatun ku.Idan ba ku da buƙatar daidaitawa, saita sigogin ƙararrawa, ko karanta rikodin ƙararrawa, kar a siyan acc na zaɓi na zaɓi...
-
Compound Portable Gas Detector Operating Instru...
Bayanin samfur Mai gano iskar gas mai ɗaukuwa yana ɗaukar nunin allon launi na TFT mai girman inci 2.8, wanda zai iya gano nau'ikan gas iri 4 a lokaci guda.Yana goyan bayan gano yanayin zafi da zafi.Ayyukan aiki yana da kyau kuma yana da kyau;yana goyan bayan nuni a cikin Sinanci da Ingilishi duka.Lokacin da maida hankali ya wuce iyaka, kayan aikin zai aika sauti, haske da rawar jiki ...
-
Littafin Umarnin watsa Gas na Dijital
Ma'auni na fasaha 1. Ƙa'idar ganewa: Wannan tsarin ta hanyar daidaitattun wutar lantarki na DC 24V, nuni na ainihi da kuma fitarwa daidaitattun siginar 4-20mA na yanzu, bincike da aiki don kammala aikin nuni na dijital da ƙararrawa.2. Abubuwan da ake buƙata: Wannan tsarin yana goyan bayan daidaitattun siginar shigar da firikwensin.Tebu 1 shine teburin saitin sigogin gas ɗin mu (Don tunani kawai, masu amfani zasu iya saita sigogi a ...
-
Mai šaukuwa mai konawa gas inji Operatin...
Siffofin Samfura ● Nau'in Sensor: Firikwensin catalytic ● Gano iskar gas: CH4 / Gas na halitta / H2 / ethyl barasa ● Ma'auni: 0-100% lel ko 0-10000ppm ● Alamar ƙararrawa: 25% lel ko 2000ppm, daidaitacce ● Daidaitacce: % FS ● Ƙararrawa: Murya + rawar jiki ● Harshe: Goyan bayan Turanci & Maɓallin menu na Sinanci ● Nuni: Nuni na dijital na LCD, Shell Material: ABS ● Wutar lantarki: 3.7V ● Ƙarfin baturi: 2500mAh baturi Lithium ● ...
-
Haɗaɗɗen ma'aunin gano iskar gas mai ɗaukuwa
Tsarin Siffar Tsarin Tsari 1. Tebura1 Abubuwan Abubuwan Haɗaɗɗen Gas ɗin Gas Mai ɗaukar nauyi Mai ɗaukar famfo mai gano iskar iskar gas USB Caja Umurnin Takaddun shaida da fatan za a duba kayan nan da nan bayan an kwashe.Daidaitaccen kayan haɗi dole ne.Zaɓin shine za'a iya zaɓa bisa ga bukatun ku.Idan ba kwa buƙatar daidaitawa, saita sigogin ƙararrawa, ko sake kunnawa...
